Disassembly: pulling out the power plug, and separate the base from the cover part as the picture
shows.
Replacement of filter: after taking the top cover down, filter can be taken out directly. (pay attention to
the direction when inserting the filter)
Adjust water flow: Slide the switch on the pump to adjust water flow, "+" (faster), "-" (slower). Factory
setting is the minimum.
A. Troubleshooting
Should your product stop working or develop a fault, first read this user's guide over. Also check
that you are using the product correctly.
If the problem persists, contact your distributor or check out on www.numaxes.com. You can also
contact NUM'AXES at +33.2.38.69.96.27 or by Email export@numaxes.com.
Depending on the extent of the malfunction, you may have to return your product for service and
repair.
For all repairs, please supply the following:
- the complete product
- the proof of purchase (invoice or sales receipt)
If you omit one of these items, the After Sales Service will have to invoice you for any repair costs
incurred.
WARRANTY
8