Correct Handling Of Machine; Points In Operation And How To Stop - Makita EX2650LH Manual De Empleo Y De Seguridad

Ocultar thumbs Ver también para EX2650LH:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CORRECT HANDLING OF MACHINE

Attachment of shoulder strap
-
Adjust the strap to the suitable length for your operation.
Detachment
-
In an emergency, push the notches (1) at both sides, and you can detach the
machine from you.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.

POINTS IN OPERATION AND HOW TO STOP

Observe the applicable accident prevention regulations!
STARTING
Move at least 3 m away from the place of refuelling. Place the Multi Function Power Head on a clean piece of ground taking care that the
attachment does not come into contact with the ground or any other objects.
A: Cold start
1)
Set this machine on a flat space.
2)
Set the I-O switch (1) to OPERATION.
(1)
Hanger
OPERATION
13
Lock-off lever
STOP
High speed
Low speed
Throttle lever
(1)

Publicidad

Tabla de contenido
loading

Tabla de contenido