Set Timer - Qlima S 3925 Instrucciones De Uso

SET TIMER

The following procedure must be followed to turn on the air conditioner at
the desired time (the remote control and the air conditioner are turned off):
1. Press the Timer button.
2. Choose the desired mode by pressing the Mode button.
Choose the desired temperature by pressing the gh button (only pos-
3.
sible if the 'cool' or 'heat' mode is selected).
4. Choose the fan speed (low, medium or high) or the automatic mode
(only possible if the Feel, Cool or Heat mode is selected) by pressing the
Fan button
In the Dry mode the fan always runs on the Auto mode.
5. Choose Swing or No swing by pressing the Swing button.
6. Press the Timer button ('h' flashes).
Use the gh button to select the period the air conditioner has to be turned on (between 0 and 10 you
7.
can set the time per half hour; between 10 and 24, you can set the time per hour).
8. Press the Timer button ('h" will stop flashing) and the set time will appear on the display.
9. Press on the Timer button again to delete de selected data from the memory.
Note: When no buttons have been pushed during setting the timer function, the remote control will
automatically turn off after 10 seconds.
The following procedure must be followed to turn off the air conditioner at the desired time (the remote
control and the air conditioner are turned off):
1. Press the Timer button.
Use the gh button to select the period the air conditioner has to be turned off (between 0 and 10 you
2.
can set the time per half hour; between 10 and 24, you can set the time per hour).
3. Press the Timer button ('h" will stop flashing) and the set time will appear on the display.
4. Press on the Timer button again to delete de selected data from the memory.
Note: When no buttons have been pushed during setting the timer function, the remote control will
automatically turn off after 10 seconds.
Note: if 'h' is flashing and you press the ON/OFF/RUN button once, the set temperature will appear on
the display. You can now change the temperature with the gh button. If you press the Timer button,
the time will appear again and can be changed at this moment*. If you press the Timer button again,
all data will be saved and the remaining time (the air conditioner will be turned on) will appear on the
display.
* When you press the ON/OFF/RUN button in stead of the Timer button, the remote control will be turned off.
Press the Timer function to check the settings on the display.
4
48