Dry Operation; Timer Operation; Example Of Timer Setting; Combined Timer - Qlima S42 Serie Instrucciones De Uso

Ocultar thumbs Ver también para S42 Serie:
Tabla de contenido

Publicidad

G
NOTE!
The FAN ONLY mode cannot be used to control the temperature. In this mode, only steps 1, 3 and
4 are applicable.

DRY Operation

1. Push the Mode button  to select DRY.
2. Push the + or - button ( and ) to set the desired temperature.
3. Push the On/off button . The operation lamp lights and the air conditioner starts to operate in the DRY
mode. Push the On/off button  again to stop this unit operation.
G
NOTE!
Due to the difference of the set temperature of the unit and the actual indoor temperature, the
air conditioner when in DRY mode will automatically operate many times without running the
COOL and FAN mode.

TIMER Operation

Push Timer on/off button (i and j) to set the on and off times of the unit. The effective operation time set
by the remote controller for the timer function is limited to a period of between 0.5 and less than 24 hours.
1.
To set the STARTING time.
1.1 Push the Timer on button i, then the remote controller display shows ON TIMER, the last set time for
the starting operation and the signal "h" will be shown on the Timer display area. You are now ready
to reset the time to START the operation.
1.2 Push the Timer on button i again to set desired unit start time.
1.3 After setting the Timer on ,there will be half a second delay before the remote controller transmits the
signal to the air conditioner.
2.
To set the STOPPING time.
2.1 Push the Timer off button j and the remote controller display will show OFF TIMER and the last set
time for the timer off operation in hours will be shown on the Timer display area. You are now ready
to reset the time of the STOP operation.
2.2 Push the Timer off button j again to set the time you want to stop the operation.
2.3 After setting the Timer off, there will be half a second delay before the remote controller transmits the
signal to the air conditioner.

Example of timer setting

TIMER ON
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting of starting operation time and the
Start
2. Press the TIMER ON button to display "6:0h" .
Off
3. Wait for one second and the digital display area will show the temperature again.
6 h

Combined timer

TIMER ON OFF
(setting both ON and OFF timers simultaneously)
TIMER OFF --> TIMER ON
On
(On --> Stop --> Start operation)
Stop
On
This feature is useful when you want to stop the air conditioner after you go to bed,
Set
2 h
10 h
and start it again in the morning when you wake up or when you return home.
4
94
signal "h" will show on the display area.
The "TIMER ON" indicator remains on and this function is activated.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sc42 serieS52 serieSc52 serieS-ja serieSc-ja serie

Tabla de contenido