10 Technical Specifications; 10.1 All Levels Of Performance - Bosch BPT-C 200 Instrucciones De Servicio

English
Bosch Power Tec GmbH

10 Technical specifications

10.1 All levels of performance

The currently applicable standards are provided in the manufacturer's
datasheet.
All central inverters have the following properties:
 Protection type IP 20 against environmental influences
 Protection class I
 Maximum permissible relative humidity 95%, non-condensing
 Central inverters switch on automatically if there is sufficient solar
generator power.
In the event of overload, central inverters adjust the operating point to the

solar generator characteristic curve.
 1 MPP tracker
 Maximum Power Point Tracking (≥ 99.9% accuracy)
Earth fault monitoring at DC input, adjustable response

Integrated earthing kit (solar generator), including series fuse

AC overvoltage protection, type I and type II

DC overvoltage protection, DC input disconnection

Overload behaviour: Working point adjustment

Excess temperature behaviour: Derating

Disconnection of the solar generator from the grid: None, via medium-

voltage transformer
 Touchscreen display with 2 GB memory
 Interference resistance (EMV)
Interference emission (EMC)

Voltage changes, voltage fluctuations and flicker

Auxiliary power supply
Single phase

230 V -10%, +15%

 50 Hz
 TN grid (L1, N, PE)
Configurable values
 Power factor cos φ: 0.7 inductive up to 0.7 capacitive
Grid characteristics (voltage and frequency) in accordance with country-

specific standards and requirements of the energy supply company
Waiting time following a grid fault (up to 900 s)

 Response time following a grid fault (0.1–60 s)
Connections present on central inverters:
 4 DC input connections
L1, L2, L3, DC +, DC – and PE: M12 threaded bolts

Auxiliary power supply: 1.5–2.5 mm² terminals

CAN interfaces

Technical specifications | 83
BPT-C 200, 300, 350 | Operating manual