Bosch BPT-C 200 Instrucciones De Servicio página 161

English
Bosch Power Tec GmbH
The Parameters submenu appears
Basic parameter values are shown in the display, which result from the
selected country and standard. You can change these parameter values
in consultation with the responsible energy supply company.
Please note the following here:
Changes must comply with the relevant standards.

After being changed, the grid characteristics can only be changed again

upon entering a password. If you require this password, contact the
manufacturer (contact details on the back of the manual).
3. Change the parameter values in consultation with the responsible energy
supply company
4. Set system-specific parameters following consultation with the
manufacturer's service centre (e.g. earthing, transformer type, etc.)
5. Touch the Apply button
■
The grid characteristics have been changed.
Refer to the help pages in the display for details.
Commissioning | 69
BPT-C 200, 300, 350 | Operating manual