Display Icons - Bushnell EQUINOX Z 260500 Guia De Inicio Rapido

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

DIsPlaY Icons

Photo Count
When the device is in Photo
mode, the number of photos
remaining (memory available)
will be displayed (5 digits)
# # # # #
Record Indicator
When recording in Video mode, the
Record indicator is displayed here.
Zoom Factor
The Digital Zoom magnification
factor is displayed here, in 0.1x
increments, from 1.0x~3.0x
The photo count, remaining record time, and SD card status will be displayed here
Remaining Recording Time
When the device is in Video
mode and not recording, the
remaining recording time will
be displayed (hrs/min/sec)
00:00:00
The IR LED light status is displayed here.
IR3=High, IR2=Medium,
IR1=Low, IR0=OFF, No icon=DAY Mode
Elapsed Recording Time
When the device is in Video
mode and recording, the
elapsed recording time will be
displayed (hrs/min/sec)
00:00:00
aDJuSt DaYtIME
LcD BrIGHtNESS
LEVEL 00
IR Setting
No SD Card
When an SD card is not present
in the card slot, the "NO CARD"
message will be displayed
NO CARD
Battery Level
This icon indicates the
remaining battery power level
LCD (Viewing) Brightness Level
Hold Brightness button for 2 sec, set
Brightness with Zoom buttons. Press
Brightness again to set for Nighttime.
Frame Rate Setting
The sensor frame rate setting is displayed here.
HALF CIRCLE=MED (default), FULL CIRCLE=LOW,
SUN=HIGH
MED
LOW
HIGH
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Equinox z 260501

Tabla de contenido