Pushing The Appliance Into The Installation Cavity - Gaggenau RY 491 Instrucciones De Instalación

9.

Pushing the appliance into the installation cavity

m
CAUTION
Caution when pushing the appliance into the
installation cavity. Do not damage the water pipe
or power cord attached to the floor.
NOTE
When the floor or the appliance is tilted in comparison
to the installation cavity adjust height adjustable
wheels before you move the appliance into the
installation cavity.

Put the mains plug into the socket.

Prevent the power cord from becoming caught.
Tie a piece of string to the middle of the power cord and
feed forwards under the appliance. When pushing in the
appliance, pull the cable forwards.
or
Using adhesive tape, stick the power cord to the floor
centrally behind the appliance approx. 15" (380 mm)
away from the rear panel of the cavity.

Carefully push the appliance into the cavity until the
m
height-adjustable wheel interlock with the anti-tip
brackets.

Remove edge protection.
19