Attaching The Lower Bracket - Gaggenau RY 491 Instrucciones De Instalación


Insert removed fixing brackets into the fixing rib and
push over the fastening screws.

Screw the nuts a little onto the double threaded bolts.
Do not tighten!

Adjust the furniture door using the threaded rod
(Torx screwdriver). Re-examine the dimensions
of the crack continuously.

Close the door and check that the depth of the furniture
front is aligned with the adjacent fronts.
If required, correct.

Tighten the bracket screws to fix the depth alignment.

Close the door and check the side alignment.
Correct by gently tapping the edge of the open furniture
door with your hand.

Tighten the nuts on the adjusting rail. This will fix the side
alignment of the door.
32

25. Attaching the lower bracket


Screw on the lower brackets (Installation kit).
Predrill holes in the furniture door!
The lower bracket fixes the side position of the door.
1. Loosen the screw.
2. Check the side position of the door.
3. Screw in the wooden screw.
4. Tighten the screw.
5. Put the cover on the brackets.
Note:
The number of lower brackets depends on the width and the
design of the furniture door.