Priority Recommendations - Tractel dynafor LLZ2 Serie Manual De Empleo Y De Mantenimiento

Tabla de contenido

Idiomas disponibles

1� Before installing and operating this device, it is essential, for its safety and effectiveness, to be aware of this

manual and comply with its requirements. A copy of this manual should be made available to every operator.

Additional copies can be supplied on request.

2� Do not use this product if one of the labels attached to the device, or any of its accessories, or if one of the

inscriptions shown on it, as shown at the end of this manual, are no longer there or no longer legible. Identical

labels can be provided on request and must be in place before continuing the use of the device.

3� Ensure that any person to whom you entrust the use of this device knows how to handle it and is able to fulfill the

safety requirements that such handling requires for the job in question. This manual must be made available to all

users. Protect your equipment from any unsupervised operation.

4� The set up and commissioning of this device must be carried out under conditions ensuring the safety of the

installer, in compliance with applicable regulations.

5� Before each use of the device, check that it is in apparent good condition, as well as the accessories used with

the device. Never use a lift table which is not visibly in good physical condition. Return it to the manufacturer for

review if it reveals malfunctions not related to the batteries.

6� Protect the device from impacts, especially on the display unit.

7� The unit must never be used for any operations other than those described in this manual. It should never be used

for a load greater than the maximum working capacity indicated on the device. The table must never be used in

an explosive atmosphere.

8� This device should not be used in a lifting line used for people without the user having checked the application of

the duty cycles required for the safety of people, and more generally the implementation of the safety regulations

applicable to the load line in which it is interposed.

9� Tractel

denies all responsibility for the operation of this device in an assembly configuration not described in

this manual.

10� Any modification of the device beyond the control of Tractel

Tractel

from all liability.

11� Any dismantling of this device not described in this manual, or repairs made outside the control of Tractel

exonerate Tractel

12� As the dynafor™ dynamometer is a lifting accessory, the safety regulations applicable to this category of

equipment must be observed.

13� In the event of termination of use, store the redundant device in conditions prohibiting its use. Comply with

regulations on environmental protection.

14� Certified in compliance with European regulations, this unit must be checked to ensure compliance with the

regulations of any other country where it may be used prior to being commissioned there. Comply with this

regulation.