Tabla De Contenido; Priority Instructions - Tractel dynafor Pro Serie Manual De Instalación, De Utilización Y De Mantenimiento

Summary
1. Priority instructions .................................................. 6
2. Definitions and pictograms ...................................... 7
GB
2.1. Definitions ....................................................... 7
2.2. Pictograms ...................................................... 7
3. Description and markings ........................................ 7
3.1. Presentation.................................................... 7
3.2. Operating principle.......................................... 8
3.3. Markings ......................................................... 8
4. Associated equipment ............................................. 8
5. Uses ........................................................................ 8
5.1. Installing the batteries ..................................... 8
5.2. Installation....................................................... 9
5.3. Starting up the sensor..................................... 9
5.4. Functions ........................................................ 9
5.4.1.
Operation in basic configuration ............ 9
5.4.2. Automatic zeroing .................................. 9
5.4.3. Information provided by the sensor
LED ........................................................ 9
5.4.4.
Operation in multiple and extended
configuration .......................................... 9
5.5. Turning the product off .................................. 10
5.6. Deinstallation ................................................ 10
6. Prohibited uses ...................................................... 10
7. Maintenance and periodic verification ................... 10
7.1. Battery replacement...................................... 10
7.2. Other verifications ......................................... 10
8. Transport and storage .......................................... 10
9. Product disposal and environmental protection..... 10
10. Technical specifications ....................................... 11
11. Regulations and standards .................................. 11
12. Troubleshooting ................................................... 12
13. Declaration of conformity ..................................... 12
6

1. Priority instructions

1. Before installing and using this product, it is
essential that you read these instructions and
comply with its instructions for safe and effective
use. A copy of these instructions must be made
available to all operators. Additional copies can be
obtained upon request from Tractel
2. Do not use this product if any of the labels affixed to
it or any of its accessories, or any of the markings
on it as shown at the end of this manual are no
longer present or legible. Identical labels can be
obtained upon request from Tractel
affixed before continuing to use this product.
3. Make sure that any user of this product is familiar
with its operation and capable of applying the
safety requirements for the task to be performed.
These instructions must be made available to these
users. Protect your equipment from uncontrolled
intervention.
4. This product must be installed and put into operation
in conditions that ensure the safety of the installer in
accordance with applicable local regulations.
5. Every time you use the product, first inspect its
condition and that of any accessories. Never use a
product that does not appear to be in good condition.
6. Return the product to the manufacturer for servicing
if there are any visible or operating problems
unrelated to the battery condition.
7. Protect the product from impacts.
8. This product may never be used for operations
other than those described in these instructions. It
may never be used for loads above the safe working
load indicated on the product. It may never be used
in an explosive atmosphere.
9. Before this product is used in a man-riding system,
the supervisor must first verify the application of
the coefficients of use required for the safety of
personnel, and generally compliance with the safety
regulations applicable to the load line in which it is
used.
10. Tractel shall not be liable for the operation of this
®
product in an assembly configuration not described
in these instructions.
11. Any modification of this product without the approval
of Tractel or any removal of any component part
®
shall release Tractel from any liability.
®
12. Any disassembly of this product not described
in this device or any repair work not approved by
Tractel shall release Tractel
®
especially if original parts are replaced by parts from
another source.
13. A dynafor™ dynamometer is a lifting accessory and
the safety regulations applicable to that category of
equipment must be applied.
.
®
and must be
®
from any liability,
®