Advanced - Sanyo LCD-42E40W Manual De Instrucciones

CURSOR
Use the to
frequency setting.
ADJUSTING THE AUDIO LEVELS
TREBLE/ BASS/ BALANCE OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
AUDIO. Press the OK button.
3
Use the CURSOR
select Treble, Bass or Balance. Press the OK button.
4
Use the CURSOR
audio setting.
BASS BOOST OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
AUDIO. Press the OK button.
3
Use the CURSOR
to highlight Bass Boost. Press the OK button.
4
Use the CURSOR
to highlight Off, Low or High. Press the OK button.
SURROUND OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
AUDIO. Press the OK button.
3
Use the CURSOR
to highlight Surround. Press the OK button.
4
Use the CURSOR
to highlight Off, Low or High. Press the OK button.
HDMI AUDIO OPERATION
HDMI AUDIO SETTINGS
HDMI1 includes three categories, Auto, Digital and
Analog for choosing. (Default setting is Auto)
For the other HDMI port, the HDMI Audio setting will be
gray out and fixed in Digital.
Auto- During this setting, the system will base on
HDMI1 signal type to detect this input source which is
pure HDMI or DVI signal, then select the audio input
signal is from HDMI port or from PC AUDIO INPUT port
automatically. (refer page 13)
Digital- During this setting, the audio input signal will be
fixed to the HDMI1 port.
NOTE : If the HDMI is a DVI signal type, there will be no
sound output.
Analog- During this setting, the audio input signal will
be fixed to PC AUDIO INPUT port.
NOTE : Even though the HDMI is pure HDMI type, the audio
20
adjust the
(UP) and (Down) buttons to
(UP) and (Down) buttons
(UP) and (Down) buttons
(UP) and (Down) buttons
(UP) and (Down) buttons
still is selected from the PC AUDIO INPUT port.
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
AUDIO. Press the OK button.
3
Use the CURSOR (UP) and
to highlight HDMI Audio. Press the OK button.
4
Use the CURSOR (UP) and
to select Auto, Digital or Analog option. Press
the OK button. (A red hook will appear in the white
blank space).
RESET AUDIO OPERATION
Reset Audio- It can reset previous adjusting settings during
the AUDIO mode to the factory default value.
1
Use the CURSOR
AUDIO. Press the OK button.
2
Use the CURSOR (UP) and
to highlight the Reset Audio. Press the OK
button.
3
Use the CURSOR (UP) and
to select Reset or Cancel. Press the OK button.
NOTE : Press the MENU button to return to the AUDIO
menu.

ADVANCED

SPORTS OPERATION (See PAGE 14)
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
ADVANCED. Press the OK button.
3
Use the CURSOR (UP) and
to select Sports. Press the OK button.
4
Use the CURSOR (UP) and
to select Off, Football, Winter Sports, Marine
Sports or Indoor Sports. Press the OK button.
(Down) buttons
(Down) buttons
(Down) buttons
(Down) buttons
(Down) buttons
(Down) buttons