Flexim WI-400 Manual Del Usuario página 76

WaveInjector WI-400
Fig. 4.35: Installation of the chain
Alignment of the installation
• Place the jaw and the chain support on the markings made on the pipe, see Fig. 4.5. Use the pipe planer for the alignment.
• Tighten the nuts of both jaws, see Fig. 4.36:
– Tighten alternately both nuts of each jaw preventing distortion or moving.
– The disk spring packages must not be compressed completely.
Fig. 4.36: Alignment of the installation
1 – disk spring package
2 – nuts
76
1 2
Supplement to operating instruction - ENGLISH
2018-01-19, SUFLUXUS_WIV4-3EN