AERMEC FCLI 32 Manual Instalación Y Uso página 20

OPERATION
The operating instructions can be found in the manual supplied with the control panel
FIN POSITION
(GLLI100) (GLLI100N) (GLLI100) (GLLI100N) (GLLI100EH)
In heating operation, a fin opening of 20° is recommended; this is indi-
cated by a raised line on the fins themselves (see figures).
In cooling operation, a fin opening of 10° is recommended; this is indicated
by a raised line on the fins themselves (see figures).
When the fins are closed ventilation is permitted.
Position of the fins in heating operation
opening 20°
Position of the fins in cooling operation
opening 10°
When the fins are closed, ventilation is
permitted.
FIN POSITION (GLLI20)
In heating operation, the full open-
ing of the fins is recommended (see
figures).
20
20°
10°
In cooling operation, a 50% fin opening
is recommended (see figures).
Position of the fins in heating operation
Position of the fins in cooling operation
When the fins are closed, ventilation is permitted.
(GLFLI10) (GLFI10N) (GLFI10M) (GLFI10EH)
For maximum efficiency of the grill accessory both in heating and
cooling it is necessary the maximum opening of the fins
With the flaps closed, ventilation is allowed.
Position of the fins in heating
/ cooling operation
maximum opening
With the flaps closed,
ventilation is allowed
When the fins are closed ventilation is
permitted.
completely open
half open
50%