Grundig GKI 1120 B Instrucciones Para El Usuario página 28

Settings
5. P ut an empty container with
a capacity of at least 1,5 litres
underneath the coffe spouts and
hot water spout.
6. P ress the touch key 'OK' (5).
The display shows "DESCALING
IN PROGRESS". The descale
program starts and the descaler
liquid is delivered first from the
coffee spouts and then from the
hot water spout.
– The
automatically performs a series
of rinses and pauses to remove
limescale deposits from inside the
machine.
– After about 30 minutes, the
message "RINSING FILL TANK"
is displayed. The appliance is now
ready for a rinsing process with
clean water.
7. E mpty the container used to
collect the descaler solution.
8. T ake out the water tank, empty
the watertank and fill it with clean
water.
9. P ut the water tank back in place
and put the container back under
the coffe spouts and the hot
water spout. The display shows:
"RINSING PRESS OK".
10. Press the touch key 'OK' (5).
– Hot water flows out of the coffee
spouts and the message "RINSING
PLEASE WAIT" is displayed.
– Once the rinsing is finished, the
message "RINSING FILL TANK" is
displayed.
11. Empty the container used to
collect the water used for rin-
sing.
28
descale programme
12. Take out the water tank, empty
the watertank and fill it with
clean water.
13. Put the water tank back in pla-
ce and put the container back
under the coffe spouts and the
hot water spout.
shows: "RINSING PRESS OK".
14. Press the touch key 'OK' (5).
– Hot water flows out of the hot
water spout.
– Once the rinsing is finished,
the display shows "RINSING
COMPLETE PRESS OK".
15. Press the touch key 'OK' (5).
– The appliance
automatically.
If the descaling cycle is interrupted
before completion, the appliance
continues to display the descale
message and the program must be
started again from the beginning.
Failure to descale the appliance in-
validates the guarantee.
The display
goes off