Maintenance and cleaning
S
M
G
F
H
– Wait for all the lights to go off, then open the
door, remove the drip tray and replace the
brewing unit.
– Replace the drip tray, together with the grounds
container.
– Close the service door.
Cleaning the milk container (N)
Always clean the tubes inside the milk contain-
er when you prepare milk. If there is still milk
in the container, do not leave it out of the refrig-
erator for longer than strictly necessary. Clean
the container each time you prepare milk as
described in the section "Making cappuccino".
All components can be washed in a dishwash-
er, placing them in the top basket of the dish-
washer.
1. T urn the milk container lid clockwise then
remove it.
2. R emove the milk spout (S) and intake tube
(M).
3. R emove the frothed milk regulator (F) by
pulling it outwards.
4. W ash all the components thoroughly with
hot water and mild washing-up liquid. Make
sure there are no milk residues left inside the
holes (H) and the groove (G) on the fine end of
the frothed milk regulator (F).
5. C heck that the intake tube and spout are not
clogged with milk residues.
6. R eplace the frothed milk regulator, milk
spout and intake tube.
7. R eplace the milk container lid.
H
EN
DE
IT
SV
FI
NO
DA
TR
RO
FR
ES
33