Smarter tools CUT-40 Manual Del Usuario página 44

•
Do not work underwater or in wet/moist environments.
•
Do not bend the torch cable sharply; this may damage the air hose.
•
Nobody other than the operator should be allowed to access the
working area.
•
Always turn off the power supply prior to repairing or moving the
machine.
•
Always turn off the power supply prior to repairing or installing any spare
parts (e.g., torch, electrode, nozzle, ground clamp, etc.).
•
Never allow a person with a cardiac pacemaker close to the working
area without the permission of a doctor.
•
The magnetic field produced by plasma cutters during operation can
disrupt pacemakers and similar devices.
•
Do not allow the ground cable to be pinched or damaged. If damaged,
replace immediately.
•
Never clean the slag off the torch head by hitting it against a hard
object.
4-4