chaser or while it is in use,or(2)the use
of the engine after such device or ele-
ment of design has been removed or
rendered inoperative by any person.
Among those acts presumed to consti-
tute tampering are the acts listed below:
Do not tamper with the original emission
related parts.
Carburetor and internal parts
●
Spark plug
●
Magneto or electronic ignition system
●
Fuel Filter
●
Muffler or any internal portion of the
●
muffler
Air cleaner element
●
Fuel tank
●
ITEM
Specification
Valve clearance Not applicable
Ignition Timing
Un adjustable
Idle Speed
3000±200 r/min (rpm)
Idle Mixture Screw
Un adjustable
High Mixture Screw
Un adjustable
Spark Plug Gap 0.8~0.9 mm (0.031~0.035 in.)
Other specifications
NO OTHER SPECIFICATION NEEDED
Congratulations on your purchase of a
new Kawasaki Handheld Edger.
Please read this Owner's Manual care-
fully before starting your new
Handheld Edger so that you will be thor-
oughly familiar with the proper operation
of our Handheld Edger's control, its, fea-
tures, capabilities, and limitations.
To ensure a long, trouble-free life for
your Handheld Edger, give it the proper
care and maintenance described in this
manual.
For those who would like more detailed
information on their Handheld Edger, a
Service Manual is available for purchase
from any authorized Kawasaki dealer.
The Service Manual contains derailed
disassembly and maintenance informa-
tion. Those who plan to do their own
work should, of course, be competent
mechanics and possess the special tools
described in the Service Manual.
KAWASAKI MOTORS CORP., U.S.A.
©2005 Kawasaki Motors Corp., U.S.A.
FOREWORD
Keep this manual at your fingertips at all
times so that you can refer to it whenev-
er you need information.
This manual should be considered a per-
manent part of the Handheld Edger and
should remain with the Handheld Edger
when it is sold.
All rights reserved. No part of this publi-
cation may be reproduced without our
prior written permission.
This publication includes the latest infor-
mation available at the time of printing.
However, there may be minor differ-
ences between the actual product and
illustrations and texts in this manual.
All products are subject to change with-
out prior notice or obligation.
GRAND RAPIDS, MICHIGAN
Second Edition (1): April 2007 (I)