Dynex DX-E101 Manual De Uso página 8

Dynex5x7-multi.book Page 8 Friday, September 9, 2005 12:32 PM
8
4 If you want to rename your computer or workgroup, click Change. The
Computer Name Changes dialog box opens.
5 If you want to change your computer's name, type a new name in the
Computer name box. Each computer on your network must have a unique
computer name.
6 If you want to enter a workgroup name, type the name in the Workgroup
name box. All computers on your network must have the same workgroup
name.
7 Click OK.
Checking the IP address
The IP address of the wireless adapter-equipped computers on your network must
be in the same range. For example, if the first computer has the IP address
192.168.0.1, the next computer's IP address would be 192.168.0.2.
To check the IP address of a wireless computer:
1 Right-click the Local Area Connection icon on the taskbar.
2 Click Status. The Wireless Network Connection Status dialog box opens.
Using the Network Setup Disk