Wii U Console - Nintendo Wii u Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Replace the battery cover.
After replacing the battery cover, tighten the screw, being careful not to overtighten it.
IMPORTANT: Always be sure to replace the battery cover and tighten the screw
before resuming use.
PLEASE RECYCLE YOUR USED BATTERIES
When disposing of a rechargeable battery, take care to
follow appropriate local guidelines and regulations.
Cover the terminals with tape before recycling.
Do not disassemble, attempt to repair, or deform the
battery pack.
Do not dispose of rechargeable batteries in a fire.
To find a collection site near you, contact your local solid
waste authority or, in the United States, visit:
http://www.epa.gov/osw/conserve/materials/battery.htm
For more information or for assistance from Nintendo, visit:
recycle.nintendo.com
48
Battery for the
Wii U GamePad
Battery for the
Wii U Pro Controller
Wii U Console
The Wii U console uses a lithium coin cell battery. Contains perchlorate material - special
handling may apply. For more information visit www.dtsc.ca.gov/hazardouswaste/
perchlorate/.
Do not remove the battery from the Wii U console unless it needs to be replaced (if the
console clock stops functioning).
Make sure that the disc LED is not on.
If the disc LED is illuminated, press
Game Disc.
Turn the power off and unplug the AC adapter.
Make sure the power LED is off, and then unplug the AC adapter from the wall outlet.
Turn the console over, and remove the battery cover.
The battery cover is designed so the screw can be loosened, but not fully removed.
NOTE: To avoid damage to the screw or threads, use a screwdriver that is appropriate
for the screw (crosshead style, size 0).
Remove the button cell battery, and
replace the battery cover.
Insert a new battery (type CR2032) so that the
+ (positive) side is up, and then replace the
battery cover.
After replacing the battery cover, tighten the screw,
being careful not to overtighten it.
IMPORTANT: Always be sure to replace the battery cover before resuming use.
Handling Used Button Cell Batteries
Cover the + (positive) and - (negative) sides with tape.
Dispose of following local laws and regulations.
For more information visit www.dtsc.ca.gov/
hazardouswaste/perchlorate/.
on the front of the console to eject the
49

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido