Using Headphones; Connecting A Microphone (Wk-220 And Wk-225) - Casio CTK-4200 Guia Del Usuario

CTK4200_WK220_e.book 11 ページ ２０１１年４月１５日 金曜日 午前１０時１分

Using Headphones

Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
• Be sure to turn down the volume level before connecting
headphones.
• Headphones do not come with the Digital Keyboard.
• Use commercially available headphones. See page E-3 for
information about options.
• Do not listen to very high volume output over
headphones for long period. Doing so creates the risk
of hearing damage.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when removing the headphones.
Connecting a Microphone
(WK-220 and WK-225)
You can connect a dynamic microphone (only) to the Digital
Keyboard for output through the Digital Keyboard's speakers.
• You can adjust the volume level of microphone input with
the
independent of overall keyboard volume.
• Built-in effects (reverb, chorus) are also applied to input
from the microphone.
For details, see "Controlling the Keyboard Sounds" (page
E-14).
PHONES/OUTPUT jack
MIC IN/SAMPLING jack
• Before connecting a microphone, make sure that the
Digital Keyboard and microphone are turned off.
• Before connecting a microphone, set both the
ek
settings to appropriate levels after connecting the
microphone.
Playing the Digital Keyboard
ek
(MIC VOLUME) knob. Microphone volume control is
(MIC VOLUME) knobs to low levels. Adjust volume
2
and
E-11