CTK4200_WK220_e.book 25 ページ 2011年4月15日 金曜日 午前10時1分
Other Sampling Functions
Changing to a Manual Sampling Start
Normally when the Digital Keyboard is in sampling standby, it
will start sampling automatically whenever it detects sound
input. You can use the following procedure to enable manual
sampling start, which will cause sampling to wait until you
press a button to start it. You can use this to insert silence
before the sampled sound.
1.
ct
Press
(FUNCTION) and then use the
(10-key) [4] (o) and [6] (p) keys to display
"SAMPLING" (page E-7).
S A M P L I N G
2.
br
Press the
(10-key) [9] (ENTER) key.
A u t o S t r t
br
3.
Press the
(10-key) [–] key to turn off
automatic sampling start.
This enables manual sampling start, which operates as
described below.
• Melody sampling (page E-20):
Sampling starts when you press
same time, which you press in step 2 of the sampling
procedure.
• Drum sampling (page E-22):
Sampling starts when you release the Digital Keyboard
key you press in step 4 of the sampling procedure.
Sampling Sounds and Playing Them on the Digital Keyboard
br
Flashes
cr
cs
and
at the
Changing to Manual Sampling Stop
Normally the Digital Keyboard will stop sampling automatically
whenever it detects there is no sound input. You can use the
following procedure to enable manual sampling stop, which
will cause sampling to continue until you press a button to
stop it. You can use this to insert silence after the sampled
sound.
1.
ct
Press
(FUNCTION) and then use the
(10-key) [4] (o) and [6] (p) keys to display
"SAMPLING" (page E-7).
2.
br
Press the
(10-key) [9] (ENTER) key.
3.
br
Press the
(10-key) [6] (p) key.
A u t o S t o
br
4.
Press the
(10-key) [–] key to turn off
automatic sampling stop.
Sampling continues until you perform one of the
operations below, even if nothing is being input from an
external device or the microphone.
• Melody sampling (page E-20)
cr
cs
Press
and
at the same time.
• Drum sampling (page E-22)
cr
cs
Press
and
at the same time, or press any
keyboard key.
br
p
E-25