Features - Snap-On EEWH329A Instrucciones De Operacion Y Mantenimiento

INTEGRATED BEAD SEATING JETS - Air infl ation jets
are integrated into the turntable clamping jaws to insure full
bead seating force directly into the tire cavity regardless
of tire diameter.
ADJUSTABLE BEAD BREAKER OPENING - Simple two-
position bead breaker pin adjustment allows for readjusting
breaker to fi t larger OD tires.
TWIN CYLINDER CLAMPING POWER - Two 3" clamping
cylinders provide uniform clamping pressure throughout
the stroke (regardless of rim sizes) as well as providing
25% more clamping power than most single clamping
cylinder tire changers. Additionally these two smaller
cylinders reduce the critical turntable to cabinet distance,
reducing the stress on the transmission.
WHEEL CLAMPS
UNIQUE SIX POINTS CONTACT CLAMPS
Provide better gripping capability regardless from dirt and
moisture.
REDUCED ANGLE CLAMPS
Increases clamping contact area with rim insuring no
slippage.
NYLON INSERT SOFT TOUCH CLAMPS
Single sided nylon insert in the clamping jaws provides
Nonmetal touch in critical customer visible areas.
VALVE CORE/TIRE TOOL STORAGE CABINET
On tire changer storage area for valves, tools, caulk, etc.
INCOMING AIR PRESSURE GAUGE
Ergonomically located air gauge allows easy operator
monitoring of incoming air pressure.
INTEGRATED PRESSURE LIMITER
Integrated safety pressure limiter stops air fl ow once tire
pressure has reached approximately. 55 PSI preventing
accidental tire over-infl ation.
MOUNT/DEMOUNT ARM ASSEMBLY
SURGE TANK IN THE TOWER - Space-saving design
integrates the air storage surge tank in the tower allowing
for fl ush to wall tire changer installation.
ADJUSTABLE SLIDEWAY - Unique adjustable vertical
mount/demount hex shaft slideway allows for easy
operator adjustment to compensate for any cumulative
wear in the slideway causing mount/demount head
movement.
NON-SCRATCH NYLON INSERT - Integrated into the
mount/demount head is a replaceable scratch resistent
nylon insert protecting against accidental rim contact.
1.1.1 TURNTABLE & CABINET FEATURES
EEWH329A
Snap-On EEWH329A
SAFETY RESTRAINT ARM (Optional)
TIRE/RIM ASSEMBLY RESTRAINT - Safety Restraint Arm
restrains tire and rim assembly to the tire machine during
the infl ation process reducing potential for injury caused
by the unlikely event of catastrophic tire or rim failure.
SIMPLE SWING ARM DESIGN - SRA arm easily swings
to the left when not in use allowing the technician to quickly
and safely perform the infl ation process without disrupting
the tire changing procedure.
GRAVITY LOCK - SRA lock mechanism operates without
any mechanical cam system eliminating the possibility of
system deterioration or mis-adjustment from mechanical
wear.
POSITIONING SAFETY INTERLOCK SWITCH -
Integrated switch insures that SRA arm is centered on the
tire/rim assembly before the infl ation process can begin.
ANTI-ROTATION LOCK - Prevents SRA from rotating
horizontally during infl ation process.
CONSTRUCTION DESIGNED FOR DURABILITY
RUST PROOF VALVES AND CYLINDERS - Critical bead
breaking cylinder is lined with rustproof polyfi ber liner for
years of rust free operation. Non-lined cylinders will pit
causing bead breaker power loss.
LIFETIME LUBRICATED POLYMER VALVES - Critical
footvalves fabricated from glass/fiber self-lubricating
material providing years of maintenance free operation.
WATER SEPARATOR AND AUTOMATIC OILER -
Lubricates all air used for machine operation, does not
lubricate air used for tire infl ation, as do some competitive
models.
HIGH TORQUE 1HP MOTOR - (air-electric models)
Industrial strength high torque turntable drive motor
eliminates tire remount stalling on low profile high
performance tires (UL/CSA approved ).
3-YEAR TRANSMISSION WARRANTY - Designed
for extremely heavy use, the critical motor to turntable
transmission linkage carries a full three (3) years
replacement warranty.
9