Assembly; Add Engine Oil - Generac GP Serie El Manual Del Propietario

Ocultar thumbs Ver también para GP Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TABLE 3. Accessories
Item
Main Unit
Owner's Manual
Liter Oil SAE 30 with Funnel
Handle Assembly (A)
Never-flat Wheel (B)
Frame Foot Assembly (C)
Axle Pin (D)
Service Warranty
Emissions Warranty
Hardware Bag
Cotter Pin (E)
M8-1.25 Hex Flange Nut (F)
M8-1.25 x 40 Bolt (G)
M8-1.25 x 45 Bolt (H)
Flat Washer (J)
3. Call Generac Customer Service 1-888-
GENERAC (1-888-436-3722) with the unit
model and serial number for any missing
carton contents.
4. Record model, serial number, and date of
purchase on front cover of this manual.

Assembly

Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Call Generac Customer Service at 1-888-
GENERAC (1-888-436-3722) for any assem-
bly issues or concerns. Please have model
and serial number available.
The following tools are required to install the
accessory kit.
• Needle nose pliers
• Ratchet
• 12mm socket
• 12mm wrench
NOTE: The wheels are not intended for over-
the-road use.
Install wheels as follows. See
1. Slide axle pin (D) through the wheel (B),
wheel bracket on frame, and flat washer
(J).
2. Insert cotter pin (E). Bend tabs (of cotter
pins) outward to lock into place.
8
WARNING
(000100a)
Figure
2-6.
Install frame foot as shown in
1. Place frame foot assembly (C) under
frame. Secure with M8-1.25 x 40 bolts (G)
Qty.
and M8-1.25 hex flange nut (F).
1
.
1
1
1
2
2
B
2
1
1
Qty.
Figure 2-6. Wheel & Frame Foot Assembly
2
Install handle as shown in
1. Install handle (A) to frame with M8-1.25 x
6
45 bolts (H).
4
2. Slide M8-1.25 x 45 bolts (H) through han-
dle bracket and handle (A). Install M8-1.25
2
hex flange nut (F).
2
.
H
A

Add Engine Oil

Engine damage. Verify proper type and quantity of
engine oil prior to starting engine. Failure to do so
could result in engine damage.
1. Place generator on a level surface.
2. Verify oil fill area is clean.
3. Remove oil fill cap and wipe dipstick clean.
See
D
J
E
F
Figure 2-7. Handle Assembly
CAUTION
Figure
2-8.
Owner's Manual for Portable Generator
Figure
2-6.
G
000902
F
C
Figure
2-7.
008049
(000135)

Publicidad

Tabla de contenido
loading

Tabla de contenido