mspa ELITE Serie El Manual Del Propietario página 20

1.1
2. Change the spa water every 3-5 days depends on the spa use. For instructions see "Cleaning, draining,
and storage".
3. Use spa chemicals to maintain proper water chemical balance. Spa damage resulting from misuse of
chemicals and mismanagement of spa water is not covered by the warranty. Consult with your local spa or
pool retailer for more information on use of chemical products.
4. All occupants must shower before entering the spa.
Do not use skin care or sunscreen products while
using the spa.
5. When spa inlet or outlet is clogged with dirt, use the
Wrench to check the problem and clean the inlet or
outlet.
Water Balance
chlorine level between 3 to 5ppm. Use the *optional Test Strips to test the spa water chemistry before each use
of the spa and continue to test the water no less than once a week.
1. Dip the entire strip into the water and remove immediately
2. Hold the strip level for 15 seconds. Do not shake excess water from the strip
3. Compare the strip pad to the color chart on the packaging label. If necessary, adjust the chemical level in
the pool water.
NOTE:
the warranty.
damage.
WATER TREATMENT:
BUBBLE
dissolving the chemicals into the water.
chemical before adding the next one to the water.
1.2
5
20
1.3