mspa ELITE Serie El Manual Del Propietario página 25

PROBLEM
SPA LOSES AIR
PRESSURE
WATER NOT
CLEAN
CONTACT YOUR LOCAL MSPA DEALER OR SERVICE CENTER FOR ANY PRODUCT RELATED QUESTIONS OR PROBLEMS.
CAUSE
Air valve got loosen
Hole or split on the spa tub
Water has been used too long
Insufficient filtering
Dirty filter cartridge
Improper water maintenance
Inflate the spa till the Yellow section of the
manometer is pushed out. Make sure the
valve is screwed tightly. Replace the valve if
necessary.
Put soap water in a squirt bottle and spray
on seams. If there is a leak, small bubbles
will come out. After you find the leak, clean
and dry the leaking area, then use the repair
patch comes with your spa to repair. Check
the repair section on P22.
Change the water
Increase filtration frequency
Clean or replace the filter cartridge in time
Refer to the chemical manufacture's
instruction
25
SOLUTION