mspa ELITE Serie El Manual Del Propietario página 22

Spa Tub Cleaning
If dirt is visible in the water or the water becomes cloudy and proper water chemistry does not clear it up,
change the water and clean the spa tub.
filter cartridge. Use a sponge and mild soap solution to wipe away any soil or stains on the inside of the spa
wall. Rinse thoroughly before refilling with clean water.
IMPROTANT: Do not use steel wool, hard brushes or abrasive cleaners.
Spa Tub and Air Bladder Repair
1. Clean and dry the area to be repaired thoroughly
3. Smooth the surface to remove any air bubbles and allow it dry for 5-10 minutes
NOTE:
1
Storage and Prepare for the Next Time Use
1. Drain and clean the spa by following the "Drainage"
and the "Spa Cleaning" sections.
2. Reserve the set-up instructions to deflate and
disassemble the spa tub, spa control unit and air
bladder.
3. Before storage, make sure all the spa components
and accessories are thoroughly clean and dry.
Air-dry the spa tub in the mild sun for an hour
before folding.
4. Fold the spa tub loosely and avoid any sharp
corners to prevent damage or leakage to the spa
liner.
5. Prepare new additional cartridge for next time use.
6. Store the spa and accessories in a dry, temperature controlled, between 0°C - 40°C (32°F - 104°F)
storage location.
7. Original packaging is recommended to be used for storage.
2
pin hole pin hole
SUN
22
3
®