Measuring Accessories - HOMMELWERKE T500 Manual De Instrucciones

1.3.1 Measuring accessories

1
2
3
4
5
6
7
8
8
The following are available as additional
accessories
1 Replacement standard pick-up (Article
No. 226491)
and, for measurements on the measuring
column:
2 Pick-up T5KK for measuring in internal
and external radii (Article No. 226900)
3 Pick-up T5KO for measurement in small
bores (as from 2.0 mm, max. depth
8.0 mm) (Article No. 231219)
4 Pick-up extension T5AZZ (Article No.
226806) (not suitable for overhead meas-
urement)
(not shown) pick-up adapter T5TK for
connection of all skid pick-ups of the
HOMMEL pick-up family TK (Article No.
226802) (not suitable for overhead meas-
urement).
5 Stationary measuring station SMP (Arti-
cle No. 999040)
6 Measuring column HS305 for holding the
T500 for series measurements. Adjust-
ment range 300 mm (Article No. 191960)
7 Swivel adapter SA305 (Article No.
191958)
8 Measuring column adapter MA305 for se-
curing the T500 to the measuring column
HS305 (Article No. 191925)
In addition, a table power supply unit T500
TN (see next section) is required.
T500