HOMMELWERKE T500 Manual De Instrucciones página 57

Attaching the vee-block
1
Replacing the pick-up
T500
Screw on the vee-block 1 instead of the
plastic cover fitted at the works.
a
Important: Handle the pick-up care-
fully! In particular, avoid pressure or
impact on the stylus tip, e.g. when insert-
ing, under all circumstances!
Unscrew vee-block if mounted.
Turn over the unit and press out the in-
serted pick-up with your fingernail.
Do not drop the pick-up!
Carefully insert the new pick-up, pushing
it in up to the stop if necessary (with your
fingernail or a small screwdriver).
Screw on the vee-block (option).
a
Important: Do not press on the pick-up
stylus!
2 Operation
15