Noise/Vibration Information; Technical Data - KRESS WTS 900 E Instrucciones De Servicio

WTS 900 E
Observe the instructions for assembly and opera-
tion provided by the manufacturer of the grinding
tool.
Always store grinding discs such that they are
protected against damage.
Before placing the machine down anywhere,
switch it off and wait for it to come to a standstill.
The grinding tools continue to run a little after
switching off.
The mains receptacles in the working area must
be protected by a residual current circuit breaker
(RC).
Do not drill holes into the housing to label the
machine. The protective insulation will be bridged.
Please use self-adhesive labels.
3

Noise/vibration information

Measured values determined according to
EN 50 260.
Sound pressure level:
Sound power level:
Work place emission value:
For operation, noise protection measures are
required.
The acceleration measured is usually less
2
than 2.5 m/s .
4

Technical Data

Angle Grinder
Article number
Input power
Output power
No-load speed
Speed under load
Grinding discs Ø
Cutting depth
max. peripheral velocity for
roughing and cutting discs
Disc chucking bore
Grinding spindle thread
Weight
Safety class
82.5 dB (A)
95.5 dB (A)
85.5 dB (A).
WTS 900 E
06 05 1301
900 Watt
490 Watt
9500 RPM
7500 RPM
max. 125 mm
max. 32 mm
80 m/s
Ø 22 mm
M 14
approx. 1.75 kg
II/
5 Illustration
1 ON/OFF switch
2 Ventilation slots
3 Auxiliary handle
4 Protective guard
5 Roughing/cutting disc
6 Clamping flange
7 Flange nut
8 Face spanner
Accessories illustrated or described are not always
included as standard delivery items.
6 Assembling the auxiliary handle
Before any work on the machine itself, pull the
mains plug!
Assembling the auxiliary handle
Place the clamping strap around the gearhead and
insert it in the openings on the clamping part of the
auxiliary handle. The auxiliary handle is locked by
turning it clockwise. In so doing make sure that the
notches on the supporting part grip in the groove on
the machine housing.
Adjusting the auxiliary handle
By turning the handle anticlockwise, the fixture is
unlocked. The auxiliary handle can be turned to the
required position. By turning the auxiliary handle
clockwise, it is locked again.
English
9