NGM You Color Smart 5 Guía Rápida página 21

Charging the battery
Charge the battery before starting to use the device. Use the supplied USB cable and the USB connector on the
top side of the phone. Connect the charger to the provided wall socket adapter, and then the device to the USB
cable. You can also charge the phone by connecting it with the PC USB port, but in this case charging will take
longer. When the battery is charging, an animated icon on the screen will show the charging progress if the phone
is on. Once the battery icon is filled, it is fully charged and the phone can be disconnected from the grid.
Attention: Do not connect the phone to a booting-up or running down PC to avoid voltage jumps. To preserve the
functionality of the product and the integrity of the warranty, we recommend the use of original NGM chargers.
Please charge the battery indoors, in a dry and favorable environment. It's normal for the battery to get slightly
warm during the charging process. The battery will reach its full capacity when cycled several times.
Power on, power off and standby
To turn on the phone, press and hold the power on/off key. To turn off your device, press and hold the same key
and confirm by selecting "Shutdown". A quick pressure sets the phone in stand-by mode (screen off) or allows you
to go back to the lock screen (see below).
21 21
ENGLISH