Troubleshooting - STERWINS 320 EP-2 Manual De Instrucciones

TROUBLESHOOTING

Before performing any maintenance or cleaning work, always pull out the
mains plug and wait until the cutter has come to a standstill.
1) Motor does not run:
• Check mains connection cable and circuit-beaker (fuse).
• Start on short grass or on an area which has already been mown.
• Clean discharge channel/housing (the mowing blade must rotate freely.
• Correct the cutting height.
2) Motor power drops:
• Correct the cutting height.
• Clean discharge channel/housing.
• Have mowing blade re-sharpened /replaced (customer service centre).
3) Grass catcher is not filled sufficiently
• Correct the cutting height.
• Allow the lawn to dry.
• Have mowing blade re-sharpened /replaced (customer service centre.
• Clean the grille on the grass catcher.
• Clean the discharge channel /housing.
4) Wheel drive does not function
• Adjust the flexible cable.
• Check the V-belt / gears.
• Check the drive wheels for damage.
Faults which cannot be rectified with the aid of this table (e.g. abnormal vibration)
may be rectified by a specialist company only (customer service centre).
EN - 20