Input Mode - Denon AVR-391 Manual Del Usuario

ENGLISH
Setting items
Default Yes : Reset to the defaults.
The "Input Assign" settings No : Do not reset to the defaults.
are returned to the default
If you select "Default" and press
settings.
displayed. Select "Yes" or "No", and then press
Auto Preset
Use the auto preset function to program radio stations.
Setting items
Start ENTER
Press
Start the auto preset
process.
• Press
TUNER
Preset".
• If an FM station cannot be preset automatically, select the desired
station by tuning it in manually, then preset it manually.
Preset Skip
Set the preset memory block (from A to G) you do not want to display.
Setting items
Block A – Block G ON : Display the selected preset memory block.
Select a block to be skipped Skip : Do not display the selected preset memory block.
from among preset blocks
(from A to G).
TUNER
Video Select
Set the source video.
Setting items
Video Select Source : Play the picture and sound of the input source.
Video of another input DVD / SAT/CBL / V.AUX / DOCK : Select video input source to view. This
source is played back can be set for individual input sources.
combined with the playing
NOTE
audio.
It is not possible to select HDMI input signals.
32
Remote control operation
buttons
Setting details
ENTER
, the message "Default?" is
Setting details
to start "Auto Preset".
RETURN MENU
or to return to the setting menu without "Auto
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)

Input Mode

The input modes available for selection may vary depending on the input source.
Setting items
ENTER
.
Input
Set the audio input modes
for the different input
sources.
Decode
Set the decode mode for
input source.
BD DVD
SAT/CBL DOCK
GAME V.AUX
Confi rm the setting
Setting details
Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input (OPTICAL/COAXIAL).
Analog : Play only signals from analog input.
• If an input source is "BD", "GAME" or "DOCK", "Digital" can be
selected by assigning "Input Assign" (vpage 31) to "Opt" or "Coax."
(Selectable items differ depending on the input source.)
If an input source is "TU", the setting is fi xed to "Digital".
• If the input source is set to "BD", "TV" or "Game", it cannot be set to
"Analog".
• When digital signals are properly input, the
the display. If the indicator does not light, check the digital input
connector assignment and the connections.
• Buttons on the remote control unit can be used
for operations.
INPUT MODE
Each time is pressed, the setting is
changed as shown below.
Auto HDMI
Auto : Detect type of digital input signal and decode and play automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
TV
• This item can be set for input sources for which "OPT" or "COAX" is
assigned at "Input Assign" (vpage 31).
• This item can be set for HDMI input sources (BD, DVD, SAT/CBL or
GAME).
• Normally set this mode to "Auto". Set "PCM" and "DTS" when
inputting the corresponding input signal.
Return to previous menu
Input Setup
Default settings are underlined.
indicator lights on
Digital Analog