EN
The three riding programs
The e-Kick has three rideing programs. This allows optimum riding performance and correct programming in a wide range of situa-
tions as well as conformity to the applicable legislation.
Position in the
Number of LEDs
Riding program
circle on the
blinking when setting
footboard
the new mode
ECO Mode
O
1
STANDARD Mode
OO
2
SPORT Mode
OOO
3
Only ride with with the scooter using the riding program with which you feel safe and that complies with the relevant legislation in
your country.
•
Ride slowly to become used to the novel riding sensation, especially when riding for the first time. Do not forget that a higher
speed also needs a longer braking distance.
•
Please also note that, depending on the country, different maximum speeds and restrictions in terms of maximum power apply
to electrically supported vehicles. It is your responsibility to be aware of these values accordingly and to adhere to them.
•
The setting tool contains strong magnets. Be careful never to hold the setting tool close to electronic devices such as your mobile
phone or close to credit cards as they could be damaged.
Power of
Maximum
force
support speed
STANDARD
250 Watt
15 km/h
SPORT
250 Watt
25 km/h
500 Watt
25 km/h
Changing the riding program
Changing the program is very simple and takes no time at all. You can either change the setting by pressing on the brake consecu-
tively or with the setting tool.
Changing the riding program with the setting tool
The setting tool included in the scope of delivery is needed for this.
Hold the setting tool on the circular cut-out on the footboard. The tool must be aligned to the small arrow head engraved on the
setting tool.
Now you can switch between the three programs by turning the setting tool and aligning the arrow to the empty circles. The LED
display shows which riding program is set by flashing dimly during two seconds, followed by flashing brightly. One LED flashes in
Eco mode, two LEDs flash in Standard mode and three LEDs in Sport mode.
ECO
ECO
STANDARD
SPORT
16