Sony SDM-X53 Guía De Instalación Rápida página 5

Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the 1 (power) indicator will light up in green.
If the function tells you the monitor may have a potential failure,
consult your authorized Sony dealer.
If the picture disappears from the screen and the
1 (power) indicator is green
1
Turn off the 1 (power) switch and disconnect the
video signal cables from the monitor.
2
Turn the monitor on by pressing the 1 (power)
switch.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Displaying this monitor's
information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
Example
MENU
INFORMATION
MODEL : SDM-X93
SER. NO : 1234567
MANUFACTURED : 2003-40
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-X53, SDM-X73 or SDM-X93
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
• Type of input signals (analog RGB/digital RGB)
Specifications
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size:
15 inch (SDM-X53)
17 inch (SDM-X73)
19 inch (SDM-X93)
Input signal format
RGB operating frequency*
Horizontal × Vertical:
28–61 kHz × 48-75 Hz (SDM-X53)
28–80 kHz × 48-75 Hz (SDM-X73/X93)
Resolution
Horizontal × Vertical: Max.
Input signal levels
Analog RGB video signal
SYNC signal
Digital RGB (DVI) signal: TMDS (Single link)
Audio input
Stereo minijack, 0.5 Vrms, 47 kΩ
Speaker output
1 W × 2
Headphones jack
Stereo minijack
Power requirements
100 – 240 V, 50 – 60 Hz, Max. 1.0 A
Power consumption
Max. 25 W (SDM-X53)
Max. 45 W (SDM-X73)
Max. 50 W (SDM-X93)
Operating temperature
5 – 35
Dimensions (width/height/depth)
Display (upright):
SDM-X53
SDM-X73
Model name
Serial number
Week and
year of
SDM-X93
manufacture
Mass
SDM-X53
SDM-X73
SDM-X93
Plug & Play
DDC2B
Included items
See "Setup."
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
1024 dots × 768 lins (SDM-X53)
1280 dots × 1024 lins (SDM-X73/X93)
0.7 Vp-p, 75 Ω, positive
TTL level, 2.2 kΩ, positive or negative
(Separatehorizontal and vertical, or composite sync)
0.3 Vp-p, 75 Ω, negative (Sync on green)
C
°
Approx. 338×327−427×200−230 mm (with stand)
×12 −16 ×7 −9
3 7 7 7 1
(13 / / / / /
8 8 8 8
Approx. 338×297×60 mm (without stand)
×11 ×2
3 3 3
(13 / / / inches)
8 4 8
Approx. 367×361−461×232−248 mm (with stand)
×14 −18 ×9 −9
1 1 1 1 7
(14 / / / / /
2 4 4 4
Approx. 367×336×60 mm (without stand)
×13 ×2
1 1 3
(14 / / / inches)
2 4 8
Approx. 412×395−495×232−248 mm (with stand)
×15 −19 ×9 −9
1 5 1 1 7
(16 / / / / /
4 8 2 4
Approx. 412×372×64 mm (without stand)
×14 ×2
1 3 5
(16 / / / inches)
4 4 8
Approx.4.6 kg (10 lb 2 oz) (with stand)
Approx.3.0 kg (6 lb 9 oz) (without stand)
Approx.7.1 kg (15 lb 10 oz) (with stand)
Approx 5.0 kg (11 lb 4 oz) (without stand)
Approx. 7.5 kg (16 lb 9 oz) (with stand)
Approx. 5.4 kg (11 lb 15 oz) (without stand)
US
inches)
8
inches)
8
inches)
8
5
(US)