Surfaces; Painted Surfaces; Light Bulbs - GE JVC3300 Manual Del Propietario E Instrucciones De Instalación

Surfaces

Painted Surfaces

Do not use a steel wool pads or other abrasive
cleaners; they will scratch the surface.
Clean grease-laden surfaces of the hood frequently. To
clean the hood surface, use a hot, damp cloth with a
mild detergent suitable for painted surfaces. About one
tablespoon of ammonia may be added to the water. Use
a clean, hot, damp cloth to remove soap. Dry with a dry,
clean cloth.
NOTE: When cleaning, take care not to come in contact
with filters and other non-enameled surfaces.

Light Bulbs

CAUTION
Allow lights to cool before
touching.
To change the light bulbs:
1. Before attempting to replace the lights, make sure that
the light switch is turned off.
2. Remove the access panel (slide the two side latches).
3. Replace with candelabra base light bulbs (MAX 40W,
120V, E12, Type B or Type T8 Bulb).
CAUTION
BULB MAY BE HOT!
4. Reinstall the access panel.
8
CAUTION
When cleaning the hood surfaces,
be certain that you do not touch the light with
moist hands or cloth. A warm or hot light may
break if touched with a moist surface. Always
let the light cool completely before cleaning
around it.
49-80778