Tools And Materials Required; Plan The Installation; Remove The Packaging - GE JVC3300 Manual Del Propietario E Instrucciones De Instalación

TOOLS AND MATERIALS REQUIRED

(NOT SUPPLIED)
Pencil and tape measure
Spirit level
Wire cutter/
Tin snips
stripper
PARTS PROVIDED
Locate the parts packed with the hood.
Hardware
bag
Phillips head
wood screws
Damper
assembly
12
Installation Preparation
Aluminized
duct tape
Step ladder
Flashlight
Phillips head machine
screws, nuts and washers
Hood
Needle-nose pliers
Silicone
Safety glasses
Phillips and flat-
blade screwdrivers

PLAN THE INSTALLATION

CAUTION
properly exhaust air, be sure to duct the
air outside – Do not vent exhaust air into
spaces within walls or ceilings or into attics,
crawl spaces, or garages.
WARNING
PERSONAL INJURY HAZARD
It is recommended that 2 people are used to
install the range hood. Failure to properly
lift rangehood could result in damage to the
product or personal injury.
NOTE: This rangehood can be installed as
either ducted or recirculation. In a ducted
application, this rangehood can be vented
through the wall or ceiling. When installed for
recirculation, the rangehood vents back into the
room.

REMOVE THE PACKAGING

CAUTION
sharp edges.
• Remove the duct covers.
• Remove the hardware bag, literature package
and other boxed parts.
• Remove and properly discard the protective
plastic wrapping and other packaging
materials.
Electric drill and
appropriate bits
6" ducting and
caps as needed
Gloves
To reduce risk of fire and to
Wear gloves to protect against
49-80778