LIST OF COMPONENTS
fig. 1
A1
A2
A3
A4
FASTENING THE WAIST HARNESS
fig. 2
fig. 3
fig. 4
CAUTION! Make sure the attachment is correct
by firmly pulling the harness upwards, from inside the
carrycot.
POSITIONING THE WAIST CUSHION
fig. 5
A2
A6
POSITIONING THE SHOCK ABSORBING CUSHION
fig. 6
fig. 7
PREPARING THE VEHICLE SAFETY BELTS
fig. 8
M1
fig. 9
fig. 10
A7
fig. 11
A3
fig. 12
fig. 13
WARNING
INSTRUCTIONS
A1
C2
A5
A4
A3
A7
A3
WARNING!
fig. 14
FASTENING THE CARRYCOT
fig. 15
fig. 16
CAUTION! Ensure proper fastening by pulling the
connection devices upwards and downwards.
CAUTION! Always fasten both connection devices.
CAUTION! Ensure that the carrycot is firmly secured to the
seat by adjusting the car seat belt tensioner and, when
necessary, changing the position of the connection devices.
fig. 17
A10
POSITIONING THE BABY INTO THE CARRYCOT
fig. 18
A2
fig. 19
A11
CAUTION! Adjust the waist belt tension for the baby to be
secure but not too tight.
fig. 20
A1
A12
PRECAUTIONS FOR USE
CAUTION!
- the baby must always be placed into the carrycot in
the supine position.
- always secure the baby and the belt and always use
the waist cushion.
- periodically check that the baby cannot remove the
waist harness.
- never leave the baby unattended.
A3
C4
A3
C4
A1
A1