Honda HHH25D Manual Del Propietário página 13

To ensure safe operation
Operator Responsibility
• Be careful not to cut anything hard such as a wire or iron plate. It causes a failure
or accident.
If the hedge trimmer should touch an obstacle, stop the engine immediately
and check if there is a problem with the cutter blade. If the cutter blade has any
damage such as cracks, bent, discoloration because of extreme heat, and
excessive wear, do not use it.
If you use a cracked cutter blade, broken pieces of the blade may fly away.
• The hedge trimmer is faulty when the engine is idling by returning the throttle
but the cutter blade keeps moving. Stop the engine immediately and idle speed
adjustment must be made. Consult your authorized Honda dealer.
• Keep all nuts, bolts and screws tight to be sure the hedge trimmer is in safe
working condition. Regular maintenance is an essential aid to user's safety and
retaining a high level of performance.
• Do not use the hedge trimmer with worn or damaged parts. Parts must be
replaced, or repaired. Replace worn or damaged parts with Honda genuine
parts. Non equivalent quality parts may damage the machine and be prejudicial
to your safety.
• Hold the hedge trimmer firmly with both your hands during operation to keep
the trimmer under control at all times.
• Trim a hedge with the cutter blade facing outward.
Do not turn the cutter blade or bring it closer to your body.
• Do not use the hedge trimmer, reaching out. Do not use it on a ladder, a table or
other unstable places.
10