Tabla de contenido
Publicidad
Be Aware of the Working Environment
Avoid long-term operation
in very hot or very cold
weather.
Be extremely careful
of slippery terrain,
especially during rainy
weather.
If contact is made with a
hard object, stop the engine
and inspect the cutting
attachment for damage.
Figure 2
Safety Labels
Figure 3
4
Be constantly alert for objects and
debris that could be thrown either from
the rotating cutting attachment or
bounced from a hard surface.
This label indicates the minimum
distance between front handle and
rear grip per ANSI B175.3.
Make sure bystanders or observers
outside the 50-foot "danger zone"
wear eye protection.
50
FEET
Reduce the risk of
bystanders being struck
by flying debris. Make
sure no one is within 50
feet (15 meters)—that's
about 16 paces—of an
operating attachment.
Always make sure the
appropriate cutting
attachment shield is
correctly installed.
When operating in rocky terrain or near
electric wires or fences, use extreme caution to avoid
contacting such items with the cutting attachment.
IMPORTANT!
Safety and Operation Information Labels:
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from your
local authorized Shindaiwa dealer.
B450
Publicidad
Tabla de contenido
