Reversing The Door - AEG SU 96040 6I Instrucciones De Montaje

Grid preparation
When changing the side at which the door opens, remove plug from
the mains.
Left door opening:
Remove the left side (A) of the grid cutting it
from the rear (see figure)
Right door opening:
Remove the right side (B) of the grid cutting
it from the rear (see figure)
Re-install the grid to the base of the appli-
ance by pushing on to the clasps (a) until
they click.

Reversing the door

The side at which the door opens can be changed from the right side
(as supplied) to the left side, if the installation site requires.
To reverse the opening
direction of the door,
proceed as shown in
the figures:
26