SBS TESPORTINEARBTPROK Manual De Instrucciones página 6

MUSIC PAUSE/PLAYING
Method 1: Shortly press Multifunction button to PLAY music paired and
standby condition, press Multifunction button again to PAUSE music.
Method 2: Pull apart the magnetic earphones, then the earphone will con-
nect with mobile phone automatically (make sure your phone once paired
with the earphones), then it will play music automatically within 5 seconds
after successfully connected, while touch the magnetic earphones, music
will pause and headset will turn off immediately.
DELETE PAIRING RECORD ON THE HEADSET: in ON and not connected
mode, press and hold "V+" and "V-" until the red and blue light flashes twi-
ce at the same time, you will hear "Beep" prompt voice, then press and
hold Multifunction button for 3 seconds, the pairing record on the headset
will be deleted. When all the pairing record is deleted, after turning on the
headset again, it couldn't connected automatically and enter into pairing
mode directly.
HEADSET RESETTING: in any state, as long as the headset is charging, it
will be reset.
TWO-LINK FUNCTION: this function means that Bluetooth® headset is con-
nected with 2 phones of Bluetooth® function at the same time. When the
phone A and phone B are neither paired, the two link operation is as below:
1) Pairing Phone A: in OFF Mode, pull apart the magnetic earphones until
indicator light flashes red and blue alternately use phone A search to the
Bluetooth® Headset, enter pairing code "0000" and confirm, pair the head-
set with phone A, and the headset will enter into standby mode.
2) Touch the magnetic earphones to turn off the headset, then turn off the
Bluetooth® function or switch off power in Phone A, the headset will go back
to no connected status.
3) Pairing phone B: in OFF Mode, pull apart the magnetic earphones until
indicator light flashes red and blue alternately, use phone B to search the
Bluetooth® device, enter pairing code "0000" and confirm, pair the headset
with phone B, and the headset will enter into standby mode.
4) Connecting the phone A&B at the same time:
Method 1: Activate the Bluetooth® function or switch on the power of phone
A, search the Bluetooth® headset with phone A, and connect it with this
phone, here 2 phones are connected with the headset.
Method 2: Activate the Bluetooth® function of phone A/B and re-turn on
the on mode headset. The headset will automatically connect with (A/B)
phone. If need to connect the 2nd phone, you should use manual operation
on phone.
SHIFT BETWEEN TWO CALLS: when the headset is connected with two
phones, during answer calling A, there is a calling from phone B, you could
shortly press the Multifunction button once to answer phone B, the call
from phone A is under the status of waiting. You can shortly press Multifun-
ction button to shift one call to another. When connected with two phones,
if answer phone A and there is phone B calling, you can press and hold
Multifunction button for 2 seconds to end the current calling and answer
another one.
DISCONNECTING: to disconnect the paired headset from your phone, ple-
ase turn off the headset or disconnect the headset from the Bluetooth®
menu of your phone. When disconnecting, you could hear "Your phone is
disconnected".
AUTOMATIC RE-CONNECTING: this function is once paired the headset will
connect with phone automatically and no need connect any more make
sure your phone Bluetooth® fuction is activated and in the operation range
with phone.
In OFF Mode, after pull apart the magnetic earphones, it will connect the
phones according to the pairing list in 120 seconds. If beyond 120 seconds
and not connected, the headset will go into standby mode. If beyond 200 se-
conds (including pairing time 120 seconds) and not connected, the headset
will turn off automatically.
6