Cleaning And Maintenance; Cleaning The Appliance; Filter Replacement - ARIETE 2706 Manual De Instrucciones

Warning!
Wait at least 5 minutes so that the steam head and cloth cool down.
Remove cloth. Wrap the electrical power cord on hooks (E) - Fig. 12. Press the handle release button (T). Fold the handle
to close the appliance (Fig. 13). Position the appliance on the attachment for carpet cleaning (S). Position the motor body
vertically.
Warning!
Make the joint between steam head and motor body snap so that the appliance is stable in a vertical position.
Put the appliance in a dry place and away from the reach of children.

cleAning And mAintenAnce

Warning!
Always unplug the appliance before cleaning it. Let the appliance to cool down for a few minutes.
Warning!
Never immerse the appliance in water or other liquids.
Warning!
Check the state of the power cable of your appliance on a regular basis before using it, and if it is damaged, take it
to the service centre closest to you to have it replaced only by specialised personnel.
Do not use abrasive products for cleaning the appliance.
Do not put vinegar, decalcifying agents or other fragrant substance inside the tank; otherwise, the warranty may
be revoked.

cleaning the appliance

Clean plastic parts with a damp, non-abrasive cloth and dry them with a dry cloth.
Clean the water tank from time to time by putting fresh water in it. Rinse and empty.
For cleaning washable cloths, refer to indications on labels. From time to time, remove and empty the dust container (M)
- Fig. 14. Remove the brush cover (N) - Fig. 15. Clean the turbo brush (Z) by removing accumulation of dust (Fig. 16). Re-
position the brush cover (N).

Filter replacement

The filter (H) must be replaced every 4-6 months or after 100 cleaning cycles (one cycle is equivalent to the consumption of
a full tank of water). Unplug it from the socket-outlet. Wait for the hot parts to cool down. Remove the tank. Extract the filter
(H) by pulling it upwards, parallel to the motor body. Replace the filter with a new one, being sure to put it firmly in its seat
(Fig. 17).
14