CLEANING AND MAINTENANCE
Warning!
Before cleaning or maintenance, always disconnect the plug from the mains supply. Allow the appli-
ance to cool for at least 30 minutes.
Cleaning the appliance
Clean plastic parts with a damp, non-abrasive cloth and dry them with a dry cloth. Do not use abrasive prod-
ucts to clean the device.
Tank cleaning
To clean the tank, insert fresh water, rinse and drain. Do not put vinegar, decalcifying agents or other fragrant
substance inside the tank; Otherwise, the warranty may be revoked.
Emptying the boiler and cleaning it internally
Warning!
This operation shall be only carried out after the appliance has cooled down completely.
Warning!
Do not put vinegar, decalcifying agents or other fragrant substances inside the boiler; Otherwise, the
warranty may be revoked.
Remove the tank (O) and empty it completely before emptying the boiler.
Place the appliance horizontally and hold it above a sink. Unscrew the cap and empty the boiler completely
(Fig. 21). Fasten the cap back.
Pour a cup of tap water through the steam tube joint (I) into the boiler (Fig. 22).
Shake the appliance and empty it again, removing all water (Fig. 21). Repeat this operation until the water
coming out of the boiler is clean and clear.
Clean the boiler at least once a month, so as to remove any residue of lime that could jeopardize proper
operation of the appliance.
THE WARRANTY DOES NOT COVER DAMAGES DUE TO LIMESTONE OBSTRUCTIONS.
17