Gb Operating Instructions; Inserting And Replacing The Batteries; General Information - Ruwido digital_2 Instrucciones De Uso

GB
We congratulate you on the purchase of a ruwido universal remote control. Your new
remote control replaces the original remote control of your TV set and the remote
control of your satellite receiver or DVB-T (Freeview)/cable box (referred to below as
STB). Read all instructions carefully and retain the instructions for reference at a later
date. Further information and additional instructions can be obtained at www.
ruwido-consumer.com. If you have any questions you can call us on the ruwido
information line 00800 31133113 at any time.
You can program your remote control using the operating instructions and the
associated code and brand list, via the following methods:
a) By manual programming, by entering a four digit code from the code list,
b) By automatic programming, depending on the brand, by entering the three digit
code from the brand list
c) Or by automatic searching.
We recommend starting by using the manual programming method (a).
Operating mode TV and TV+STB
Your new digital_2 remote control has two different operating modes.
This allows you to operate both the digital tuner (DVB-T/S/C) integrated in the set and
also external satellite receivers or a DVB-T/Cable Box (STB).
In the fi rst operating mode pre-set on delivery (TV) all keys on the digital_2 remote
control operate the TV set.
When you program a STB code (whether manually or automatically by searching),
your digital_2 remote control switches to the second operating mode (TV+STB). In this
operating mode, only the TV-Standby (
the other keys operate the satellite receiver or the DVB-T/Cable Box (STB).
Switching between TV and STB is no longer necessary when using your new digital_2
remote control.
If you want to return to the fi rst operating mode (TV) after programming the STB, you
need to fully reset the remote control. See function "Deleting settings (reset)".

Inserting and replacing the batteries

Your digital_2 remote control is powered by two 1.5 Volt alkaline batteries (AAA /
LR 03). Insert the batteries in accordance with the markings on the battery
compartment. Please take extra care to ensure correct polarity. Dispose of the old
batteries in accordance with local regulations.
Note
Your digital_2 has an internal memory to make sure that the programming is
retained after changing the batteries.
We recommend that you always use new batteries. Never combine old and new
batteries because the performance of your remote control and the service life of the
batteries will be negatively affected.

General information:

Your digital_2 is fi tted with a 5 second protection mechanism. When programming, you
must press a button within a period of 5 seconds, otherwise the remote control reverts
back to its regular operating mode.
BA digital_2 RC10120 Innenteil, V1, 105x210 mm, 1c CS4.indd 12 BA digital_2 RC10120 Innenteil, V1, 105x210 mm, 1c CS4.indd 12
OPERATING INSTRUCTIONS
ruwido digital_2 universal remote control
:
) and AV ( ) keys operate the TV set. All
av
tv
12
19.01.2011 12:29:20 19.01.2011 12:29:20