Ruwido digital_2 Instrucciones De Uso página 20

GB
Code blocking
You can activate the code block to prevent inadvertent programming of the digital_2.
1) Press and hold the TV Standby button (
2) Use the number buttons to enter the code
again.
3) The remote control is now blocked for re-programming
Note
Signal LED ( ) on the digital_2 remote control fl ashes once long instead of twice
short.
Note
Deleting settings (reset)
1. Press and hold the TV Standby button (
2. Use the number buttons to enter the code
twice to confi rm that your digital_2 remote control has been reset.
Note
control will lose all its programming and is returned to the as-delivered condition.
GUARANTEE
Your remote control is guaranteed for a period of two years from the date of purchase.
Please consult the dealer in the event of a guarantee claim.
BA digital_2 RC10120 Innenteil, V1, 105x210 mm, 1c CS4.indd 20 BA digital_2 RC10120 Innenteil, V1, 105x210 mm, 1c CS4.indd 20
OPERATING INSTRUCTIONS
ruwido digital_2 universal remote control
: The fact that the code block is activated can be seen by the fact that the
: Please repeat the steps 1 to 3 if you wish to de-activate the code block.
: This "Delete settings (reset)" function means that your digital_2 remote
Note on environmental protection:
After the implementation of the European Directive 2002/96/EU in the national legal system, the
following applies:
Electrical and electronic devices may not be disposed of with domestic waste.Consumers are obliged
by law to return electrical and electronic devices at the end of their service lives to the public collecting
points set up for this purpose or point of sale. Details to this are defi ned by the national law of the
respective country. This symbol on the product, the instruction manual or the package indicates that a
product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old
devices, you are making an important contribution to protecting our environment.
) until the signal LED ( ) fl ashes twice.
tv
. The Signal LED fl ashes twice
0 0 0 7
) until the signal LED ( ) fl ashes twice.
tv
. Die Signal LED ( ) fl ashes
0 0 0 0
20
19.01.2011 12:29:59 19.01.2011 12:29:59