Product Specifications - HyperIce Normatec 2.0 Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The Normatec 2.0 control unit uses Bluetooth 5.0 wireless technology with the following radio specifications:
Frequency
Modulations
Transmit Power
Receiver Sensitivity
Security
Contains Rigado, Inc. BLE Module BMD-300-A-R, FCC ID: 2AA9B04, IC ID: 12208A-04
This control unit complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
control unit may not cause harmful interference, and (2) this control unit must accept any interference received, including
interference that may cause undesired operation. This control unit complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this control unit may not cause interference, and (2)
this control unit must accept any interference, including interference that may cause undesired operation of the control
unit.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le onctionnement.
INTERNAL BATTERY INFORMATION
This Normatec 2.0 control unit is equipped with a rechargeable lithium ion battery. The internal battery is designed to
allow use of the Normatec 2.0 System anywhere—even when power outlets aren't available. The Normatec 2.0 control
unit may need to be plugged in before first use. The battery will provide power for 2+ hours of continuous use. It takes
approximately 6 hours to fully charge the battery when the control unit is plugged in and not in use. The rechargeable
lithium ion battery is intended to be changed only by authorized service personnel with the use of a special service tool.

PRODUCT SPECIFICATIONS

• Normatec 2.0 Dimensions: 4" (width), 4.5" (depth), 8" (height); [10.2 cm (width), 11.43 cm (depth), 20.32 cm (height)]
• Normatec 2.0 Weight: 3.6 lbs [1.63 kg]
• Normatec 2.0 electrical requirement: 15V
• Temperature (operating): +41° F to 104° F [+5° C to +40° C]
• Temperature (storage): -13° F to +158° F [-25° C to +70° C]
12
2.36 to 2.5 GHz
GFSK at 1 Mbps, 2 Mbps data rates
+4 dBm
BMD-300/301: -96 dBm (BLE mode) BMD-350: -94 dBm (BLE mode)
AES-128
DC 1 A

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido