Placing The Printer - Dascom Tally T5040 Guia De Instalacion

Installation

Placing the printer

6
Place the printer on a solid, flat, surface, ensuring that the printer is positioned in
such a way that it can not topple, and that there is easy access to the control panel
and paper input devices. Also ensure that there is enough space for sufficient ven-
tilation and for the printed output:
Location
Left and right side of the printer
Top of the printer
Rear of the printer
When selecting the printer location, observe the following additional instructions:
Never place the printer in the vicinity of inflammable gas or explosive substances.
STOP
Do not expose the printer to direct sunlight. If you cannot avoid placing the
printer near a window, protect it from the sunlight with a curtain.
When connecting a computer to the printer, make sure not to exceed the maxi-
mum cable length (see User guide on the Online CD-ROM, Technical Specifi-
cations).
Ensure sufficient distance between the printer and any heating devices/radia-
tors.
Avoid exposing the printer to extreme temperature or air humidity fluctuations.
Above all take care to avoid the influence of dust.
It is recommended to install the printer in a place which is acoustically isolated
from the workplace because of the noise it may produce.
to ensure sufficient ventilation
to print on a DIN A4 sheet
Quick start guide
Minimum space
1 cm
2 cm
10 cm
12 cm