Ferroli QUADRIFOGLIO B Instrucciones De Uso, Instalación Y Mantenimiento página 87

QUADRIFOGLIO B
Access the "User" menu by pressing the contextual button 1 (detail 1 - fig. 1). Then use
the "menu/navigation" buttons to access the various levels described in the following ta-
ble.
HEATING
Adjustment Temp
Reduction Adjustment Temp
Sliding Temperature
Time Program
DOMESTIC HOT WATER
Adjustment Temp
Reduction Adjustment Temp
Legionella
Time Program
HOLIDAY FUNCTION
MAINTENANCE
Test mode
Service Information
Service Intervention Date
SETTINGS
Language
Unit of Measure
Set Date
Set Time
USER MENU
See fig. 12
See fig. 13
See fig. 26
Curve1
See fig. 27
Offset1
See page 87
Outside Temp Heat Off
Curve2
Offset2
See "Time programming" on page 85
See fig. 14
See fig. 15
See "Legionella programming (with optional hot water
tank installed)" on page 86
See "Time programming" on page 85
See "Holiday Function" on page 86
See fig. 63
Test mode
See fig. 58
Gas Type Selection
See "CASCADE
TEST mode activa-
Cascade Test Mode
tion" on page 98
See "Service Information" on page 86
See "Service Intervention Date" on page 86
See fig. 7
See fig. 8
See fig. 9
cod. 3541F572 - Rev. 01 - 09/2015
Indication during operation
Heating
A heating demand (generated by the Room Thermostat, Remote Timer Control or 0-10
Vdc signal) is indicated by activation of the circulating pump and by the hot air above the
radiator (fig. 2).
Configuration "Heating only/Double circulating pump"
23°C
/
/
Thursday 9 Jan. 2014 11:25:40
fig. 2
DHW (with optional hot water tank installed)
A hot water tank heating demand is indicated by activation of the drop under the tap
(fig. 4 and fig. 5).
Configuration "Double circulating pump"
23°C
Thursday 9 Jan. 2014 11:28:22
fig. 4
Exclude hot water tank (economy)
Hot water tank temperature maintaining/heating can be excluded by the user. In case of
exclusion, there will be no delivery of domestic hot water. The hot water tank can be de-
activated by the user (ECO mode) by pressing the eco/comfort button (detail 10 -
fig. 1). In ECO mode, the display activates the symbol
mode, press the eco/comfort button (detail 10 - fig. 1) again.
/
Configuration "Circulating pump and 3-way valve"
-- 23°C
Thursday 9 Jan. 2014 11:25:40
Configuration "Circulating pump and 3-way valve"
32°C 23°C
Thursday 9 Jan. 2014 11:29:27
. To activate the COMFORT
23°C 32°C
Thursday 9 Jan. 2014 11:30:43
fig. 6 - Economy
EN
32°C
fig. 3
32°C
fig. 5
8