Ferroli QUADRIFOGLIO B Instrucciones De Uso, Instalación Y Mantenimiento página 90

Press the navigation button 7 to move to the end time of the first time band (fig. 19) and
set it to the desired value using the contextual buttons 1 and 2.
Scheduler Set
1. 06:00 - 16:00
2. --:-- - --:--
--:-- - --:--
3.
4. --:-- - --:--
5. --:-- - --:--
6. --:-- - --:--
Copy to the Next Day
Save & Exit
to confirm
Press the navigation button 7 and use the contextual buttons 1 and 2 to set the work
mode during the first time band (fig. 20)
Scheduler Set
1. 06:00 - 16:00
2. --:-- - --:--
--:-- - --:--
3.
4. --:-- - --:--
5. --:-- - --:--
--:-- - --:--
6.
Copy to the Next Day
Save & Exit
to confirm
Then, press the navigation button 7 to set (if necessary) the next time bands (fig. 21,
fig. 22 and fig. 23).
Scheduler Set
1. 06:00 - 16:00
2. 16:00 - 21:00
--:-- - --:--
3.
4. --:-- - --:--
5. --:-- - --:--
6. --:-- - --:--
Copy to the Next Day
Save & Exit
to confirm
Scheduler Set
1. 06:00 - 16:00
2. 16:00 - 21:00
--:-- - --:--
3.
4. --:-- - --:--
5. --:-- - --:--
6. --:-- - --:--
Copy to the Next Day
Save & Exit
to confirm
Scheduler Set
1. 06:00 - 16:00
2. 16:00 - 21:00
21:00 - 06:00
3.
4. --:-- - --:--
5. --:-- - --:--
--:-- - --:--
6.
Copy to the Next Day
Save & Exit
to confirm
EN
1
2
7
fig. 19
1
2
7
fig. 20
1
2
7
fig. 21
1
2
7
fig. 22
5
7
fig. 23
cod. 3541F572 - Rev. 01 - 09/2015
QUADRIFOGLIO B
When the day has been programmed, press the OK button; the item "Save & exit" will be
automatically selected (fig. 24). Use the navigation buttons 5 and 7 to change the previ-
ous settings, or press OK to confirm: in this case the display will again show the day
(fig. 16) or the interval of days to be programmed (fig. 17). The same procedure can
therefore be followed to complete the desired weekly program.
1. 06:00 - 16:00
2. 16:00 - 21:00
21:00 - 06:00
3.
4. --:-- - --:--
5. --:-- - --:--
6. --:-- - --:--
Copy to the Next Day
Save & Exit
To program the next day in the same way, select "Copy to next day" and press OK to
confirm (fig. 24).
To reset the time program to the default values, press the contextual button
A
3 in the Time Program menu (fig. 25) and confirm with OK.
Scheduler Set
Monday
Tuesday
Wednesdey
Thursday
Friday
Saturday
Sunday
Monday-Sunday
to confirm
The two Heating and DHW time programs are independent even in case of re-
A
setting to default values.
Legionella programming (with optional hot water tank installed)
This function must be activated by enabling an installer parameter.
Access the "Legionella" menu through the path "USER MENU
WATER" "Legionella" to set:
• Antilegionella Day. Defines the day of the week during which the function will be
activated.
• Time of Antilegionella Day. Defines the function start time.
• Antilegionella Duration. Defines the duration (in minutes) of the function.
• Antilegionella Adjustment Temp.. Defines the DHW Adjustment temperature dur-
ing the function.
Holiday Function
Access the "HOLIDAY FUNCTION" menu through the path "USER MENU
DAY FUNCTION" to set:
• Holiday start date.
• Holiday end date.
The display can activate two types of icons:
• - The Holiday function is programmed but not yet active.
• - The Holiday function is in progress. The boiler will behave as if Summer mode
and Economy mode were active (with optional hot water tank installed).
The frost protection and Legionella functions will remain active (if activated).
Service Intervention Date
This informs when the alert of programmed maintenance by the technician will be acti-
vated. It does not represent an alarm or a fault but just a notice. After that date, whenever
the Main menu is accessed, the boiler will activate a screen indicating that programmed
maintenance is due.
Service Information
This information shows the telephone number to contact in case of assistance (if pro-
grammed by the technician).
Room temperature adjustment (with optional room thermostat)
Using the room thermostat, set the temperature required in the rooms.
Room temperature adjustment (with optional remote timer control)
Using the remote timer control, set the temperature desired in the rooms. The boiler unit
will set the system water according to the required room temperature. For information on
the remote timer control, please refer to its user's manual.
Scheduler Set
to confirm
fig. 24
3
fig. 25
"DOMESTIC HOT
"HOLI-